啟動顯微鏡/Getting started:

1. 取出產品所附電池(AA鹼性電池4顆),將電池依圖示安裝至電池座裡。或是將電源變壓器插入顯微鏡的電源輸入孔並插入插座。(圖1)
1.Install batteries in battery compartment according to the illustration (or plug the 5V power adaptor into the microscope power input and then plug into the power source).(fig.1))

2. 旋轉【電源開關】,聽到”卡”後,顯微鏡隨即開機。(圖2)

2. Rotate the Light Regulator; after hearing a 'click', the microscope can be switched on. Continue rotating the Light Regulator, LED light will increase in brightness.(fig.2) 
01.jpg     


觀測鑽戒/Viewing a Diamond Ring:

1. 根據戒圍選擇適當的戒指盒將戒指放入戒指盒中(圖3),再放入戒指盒升降台(圖4),並放置於觀測圓盤上。
1. According to the ring size choose the appropriate ring box.(fig.3) Place the ring in the ring box, and place it on the vertical lifting stage. (fig.4)

02.jpg  
 

2. 旋轉旋轉台的【升降旋鈕】上升/下降改變戒指的高度,將鑽石調整到鏡頭正前方(圖5)。接下來微調讓鑽石腰圍至於畫面中央,過程中持續旋轉【調焦旋鈕】讓畫面保持清晰。
2. First, rotate the knob of the vertical lifting stage to lift or lower the ring box so it is located to the front of the center of the lens. Constantly use the Focusing Knob to adjust picture tone until images in the picture are sharp. (fig.5)

3. 調整鑽石腰圍至畫面中央後,旋轉升降旋轉台尋找刻字。(圖6)
3. You can rotate the vertical lifting stage to help locate the diamond girdle inscription. (fig.6)
03.jpg  

 


4. 欲將號碼更清晰的顯示在LCD上,可以調整LED燈的位置。(位於戒指正上方距離約1∼2公分處補光效果最佳)。 (圖7)
4. To display the number even more clearly on the LCD, adjust the LED light position (Range from the ring should be about 2 centimeters ,right above the diamond for optimum results). (fig.7)

5.LCD螢幕上方有【放大倍率調整鈕】,可以放大畫面,讓刻字更清晰。也可轉動螢幕將調好的刻字呈現給客人。(圖8)
5.The LCD screen has a “Zoom-in Button” that can enlarge the image.You can also adjust the angle of LCD screen.(fig.8)
04.jpg  

 

觀測裸鑽/Viewing a Loose Diamond:

1. 依據裸鑽的尺寸選擇適當的鑽石尖底座,並放上裸鑽。(圖9)
1. Choose the appropriate loose diamond culet base according to the carat. Place the loose diamond on the top of the culet base and then place the culet base on the loose diamond holder.(fig.9)


2. 將橡膠尖底座放上裸鑽升降台,並將裸鑽升降台放置觀測圓盤上。(圖10)
2. Place the loose diamond holder on the microscope plate.(fig.10)
05.jpg  

 


3. 旋轉升降旋鈕使鑽石腰圍置於螢幕中央(圖11),與此同時一併使用顯微鏡的調焦旋鈕保持畫面清晰。 (圖12)
3. Rotate the adjusting knob of the holder to lift or lower the loose diamond and find the diamond girdle. (fig.11) In the mean time, use the Microscope Focusing Knob to adjust picture tone until images in the picture are sharp.(fig.12)
06.jpg  

 

4. 可旋轉裸鑽升降台座協助尋找腰圍上的雷射刻字。(圖13)
4. You can rotate the loose diamond holder to find the laser inscription.(fig.13)


5. 欲將號碼更清晰的顯示在LCD上,可以調整LED燈的位置。(位於戒指正上方距離約1~2公分處補光效果最佳)。 (圖14)
5. To display the number even more clearly on the LCD, adjust the LED light position (Range from the ring should be about 2 centimeters ,right above the diamond for optimum results). The LCD screen has a [Zoom-in Button] that can enlarge the image.You can also adjust the angle of LCD screen.(fig.14)
07.jpg   

創作者介紹

Ur diamond 發表在 痞客邦 PIXNET 留言(0) 人氣()